Spray Bending Lubricant
One (1) 12 oz. can
Case of Nine (9) 12 oz. cans
Profile Folding – Bending Attachment
Bend and shape solid plate, bar stock and rod to tight radii. Adapts to Ercolina rotary draw benders: 030 Mega Bender®, TB60, Top Bender® PLUS, SB48 and Super Bender® PLUS.
|Material Type||Maximum Diameter|
|Rectangular solids||.187 x 4.000|
|Solid square||.625 x .625|
|Angle Iron||2 x .312|
Cap Rail Tooling
Available by special order only for 030 Mega Bender®, TB60,Top Bender® PLUS, SB48 and Super Bender® PLUS.
Roller Counterbending Dies
Available for round and square profiles, roller dies are recommended when bending high tensile materials, solids, heavy wall profiles and rusted material.
Note: Roller dies must be positioned a minimum of 2½” from face of center former; failure to do so will cause machine damage. Not suitable for bends beyond 130°.
Part# 050I from ⅜” to 2⅜”
Part# 050J from 2½” to 3″
MUST SPECIFY MATERIAL DIAMETER WHEN ORDERING
Rotary Draw Tie Bar Accessory
For use on 030 Mega Bender®, TB60,Top Bender® PLUS, SB48 and Super Bender® PLUS. Tie bar accessory should always be used when bending heavy wall profiles and solid materials.
Material Extraction Device for Square Tube
Extractor plate assists in square material extraction for profiles, solid and hollow. For use on 030 Mega Bender®, TB60,Top Bender® PLUS, SB48 and Super Bender® PLUS.
Counterbending Die Adaptor Plate
Ercolina® is changing the mount of all counterbending dies to the drop-in, dovetail mount. The counterbending die adaptor plate is a high quality, machined, aluminum bracket which enables users to quickly interchange between both mounting styles of counterbending dies.