CNC Plasma & Laser Cutting Machines for Pipe, Tube, and Profiles

The Ercocut line of CNC plasma and laser cutting machines cut round pipe, square and rectangular tube, and open profiles with production-level speed and accuracy.

If you cut, cope, or notch pipe and tube by hand, the Ercocut line will change how your shop works. These CNC plasma and laser cutting machines process round pipe from 3/4″ up to 8-5/8″ diameter, square and rectangular tube, angle, C-channel, and flat bar – in carbon steel, stainless steel, aluminum, brass, and copper – on bars up to 24.5 feet long. Copes, saddle cuts, miters, hole patterns, slots, tube notching, and weld-ready bevels to ±45° are all produced in a single automated cycle. Import your part straight from SolidWorks, Tekla, SDS2, AutoCAD, or any CAD system (DXF, DWG, STEP, and IGES files), and the software builds an optimized cut path with automatic nesting to get the most parts out of every bar. Self-centering chucks grip the material at both ends to eliminate vibration, automatic supports adjust to the programmed part so long bars never sag, and brushless servo motors with absolute encoders deliver cutting speeds up to 196 feet per minute – with no re-homing after a shutdown. What used to take hours of layout, band-saw work, hand torching, and grinding comes off the machine in minutes, ready to weld.

Choose plasma or fiber laser – both built in Italy, both supported in the USA. The Ercocut EC220PHT CNC plasma cutter ships with a genuine Hypertherm Powermax85 power source and full 8-inch pipe pass-through, making it the workhorse choice for structural steel, handrail and guardrail fabrication, trailer and equipment manufacturing, and mechanical piping. The Ercocut EC245L CNC fiber laser cutter pairs a 3 kW fiber laser source with an autofocus cutting head for clean, burr-minimal edges on tube and profile work where precision matters – ornamental and architectural metalwork, furniture frames, shelving and racks, and automotive, agricultural, and hydraulic components, from full production runs down to prototypes and short runs with fast program changes at the control. Every Ercocut machine is manufactured by CML International in Italy and sold, installed, and serviced by Ercolina’s factory-trained team in Davenport, Iowa – with spare parts, application support, and equipment financing that puts true CNC tube and pipe profile cutting within reach of shops that assumed this technology was out of their budget. Send us a drawing, and we’ll show you your own parts cut on an Ercocut.

Built in Italy by CML International and backed by Ercolina’s USA-based sales, service, and parts team in Davenport, Iowa, Ercocut machines bring true CNC pipe and tube profile cutting within reach of fabrication shops that thought this technology was out of their budget.

Why fabricators choose Ercocut:

• Cuts round pipe up to 8-5/8 inch and square/rectangular tube up to 6 inch (plasma), 8 inch (laser)
• Genuine Hypertherm plasma power source on plasma models
• Programs saddle joints, copes, miters, and holes directly from CAD – no templates, no hand grinding
• Replaces hours of layout, band-saw, and torch work with minutes of unattended cutting
• Priced and financed for real-world shops – leasing options available

If you aren’t sure what you need, contact us and we will walk you through which will best suit your specific design requirements.

We offer so much more…

Ercolina has long been known as the leading manufacturer of pipe and tube bending machines, but did you know CML USA, Inc. supplies so much more fabricating machinery, offering a wide variety of metalworking machinery which includes pipe and tube plasma and laser cutters.

Our plasma and laser cutting machines are priced well within most customer’s budget. CML USA, Inc. works with several lease companies to offer our customers the best solution for their shop finances. For more lease information or to obtain a cost estimate, equipment financing options are available.

If you require assistance to determine which Ercolina plasma or laser cutter is right for your shop, our highly trained staff is ready to assist you.

Frequently Asked Questions

What can you cut with an Ercocut machine?
Handrails and guardrails, structural steel and joinery connections, roll cages and chassis tubing, HVAC and mechanical piping, furniture and store fixtures, agricultural and heavy equipment frames, shipbuilding and architectural steelwork.

What sizes of pipe and tube can the Ercocut plasma cutter handle?
It cuts round pipe up to 8-5/8 inch and square/rectangular tube up to 6 inch (plasma). Maximum pierce capacity depending on cutting tip 3/4 inch. More important is to consider material weight per foot – machine capacity 35 lbs./foot.

Plasma or laser – which is right for my shop?
Plasma is the workhorse for structural pipe and heavier wall thickness at a lower investment. Laser delivers finer edge quality and tighter tolerance on thinner-wall tube. Our staff will walk you through which fits your parts – contact us.

Does it cut copes and saddle joints for welding?
Yes! The CNC control programs saddles, copes, miters, holes, and slots directly, so joints fit up right off the machine.

Is financing available?
Yes! CML USA works with several leasing companies. See our equipment financing page or ask for a cost estimate with your quote.

Who services the machine in the USA?
CML USA, Inc. in Davenport, Iowa, factory-trained technicians, spare parts, and application support.